INSTALLATION (CLIMATE CONDITION)

Install the PV module in the following conditions:

Table : Installation (Climate Condition)
Ambient temperature: -20℃ to +40℃ Operating temperature: -20℃ to +80℃ Operating temperature: -20℃ to +80℃
Wind pressure:below 3000pa 0.10%℃ Water resistance: don't install the PV module in a location where it would be immersed in water or continually exposed to water from a sprinkler or fountain etc.
Corrosion resistance:except for corrosive salt area and sulfurous area. -0.37%℃

ORIENTION

Install the pv modules facing south(in northern hemisphere), or to north (in southern hemi sphere). Module facing west or east can generate a smaller amount of electricity than facing south(in northern Hemisphere), or to north(in southern hemisphere), incorrect orientation will result in loss of power output.

MOUNTING AND NOTES

Using spring washers and flat washers to fasten the pv module to shelf. Ground the pv module properly in accordance with mounting structure and environment.

Note:

  • Not install the pv module near naked flame or flammable materials.
  • Mounting structure should withstand forces from wind pressure and snowfall pressure etc.

Mounting structure should withstand environment. select proper materials and corrosive treatment. Use appropriate methods to mount pv modules. fall of modules from high place will cause death, injury or damage.